|
Post by Wags on Oct 2, 2008 6:10:48 GMT
Hey there,
I've just purchased a pipa recently, and while I am unfamiliar with the instrument, I do believe my strings are bad.
Now, as I said, I've no experience with eastern instruments.. but as a guitar player, I can tell you that I am not THAT bad at tuning. I can tune strings fine without breaking them, even light high e strings don't give me much trouble.. but I've just broken TWO (that's right, 2) strings on my pipa trying to tune it on the first day.
The first string was a lesson quickly learned that this instrument is NOT like tuning a guitar, and it requires much less streching of the string to get the desired note. However, I then broke yet ANOTHER string. These things seem rotten, and while I am not familiar with pipa strings.. they just seem like they're old and wore out.
At any rate.. can someone give me a 101 on pipa strings and tuning experiences? I also seem to have a problem with locking my strings in tune.. my pegs slide back.
Any help is appreciated! Thanks.
|
|
czy
Intermediate
Posts: 42
|
Post by czy on Oct 2, 2008 8:41:29 GMT
slide back?i guess you mean loosening of strings. apply chalk on the pegs. also, try to tune the pipa slowly. don't turn/tightened the strings too quickly. do it at a steady pace so that the chances of 'overshooting' the desired note is reduced and chances of the string snapping is reduced too.the standard tuning of the strings are (frm thinest string(1st string) to thickest string(4th string)) A E D A. where the A note in 1st and 4th string are seperated by an octave.in which the 4th string (A) is the lowest note of all the 4 strings.
|
|